room to room 1 to 3 socket wireless power switch

1.ABS indoor 2.125V10A(875W) 3.1 remote works with 3 sockets 4. Good design remote 5. Easy to change battery

Model No.: DL-CS268

Description: room to room 1 to 3 socket wireless power switch

   

Product Detail:

DL-CS268 is an indoor RF remote power socket, the outstanding house design attracts people’s eyes so strongly. It will bring you infinite comfortable and convenient life.

 

1. Feature:

     a. Super heterodyne receiving circuit with high anti-jamming and stable and reliable performance

     b. Learning encode and decode format to avoid interfere from the neighborhood.

     c. 1 remote works with 3 power sockets separately.

     d. White color crust ABS material with high strength, high temperature reesistance.

     e. High conductive, nickel plating processing copper sheet and high performance relay make the socket longer life of about 10,000 times of on and off and better performance.

     f. Wall penetration remote control can cover the range of 8~15m, people can control the lights in the living room from the test room.

     g. Direct application, not need to modify any current appliance circuit.

 

2. Technical specification:  

Operating voltage:	125VAC/60Hz
Operating current:	10A
Rating power:	875W
Operating frequency:	315MHz, 433.92MHz, customized frequency available
Working temperature:	-25~40°C

 

3. Remote socket operation instructions: 

   a. 3V CR2032 lithium battery for the remote control.

   b. To replace the battery, slide off the battery cover at the back, remove exhausted or dead batteries from the remote control, and put a new CR2032 lithium battery, pay attention to the + & - polarity during the operation.

   c. Test: slide the cover back, press “ON” or “OFF” button of the remote control to make sure the indicating LED of the remote control lights up.

   d. Remove the batteries if the remote is deserted for a long time.

   e. Not dispose the batteries in the fire.

 

4. Remote socket operation instruction:

   a. Plug the remote socket into a ground 3-plug outlet, make sure the outlet is GFCI approved, double confirm the connection is reliable.

   b. LED indication of the remote socket will be lighting up after successful connection, or pls check the connection.

   c. Plug your appliances into the outlet of the socket base, make sure your appliance are powered on.

   d. There are numbers of “1” “2” “3” at the back of the power socket to match the number on the remote control.

   e. Press “ON” & “OFF” button of the remote control to active the remote socket.

 

5. Additional description:

   a. The remote socket has been tested to comply with the limits of a CLASS B digital device, pursuant to Part 15 of FCC rules. These limits were designed to provide reasonable protection against from harmful interference in a residential installation.

   b. This device is possible to be interfered by some other wireless radio wave, like radio, broadcast, TV receiver etc, so pls keep it away from the wireless interfere source.

   c. It is not encouraged to install 2 sets of remote sockets which has the same working frequency within 15 meters, otherwise it is possible that two devices interfere each other when they are used at the same time.

 

6. Warning (very important) 

   a. The applied power not exceed the rating power.

   b. Don’t splice, repair or modify.

   c. Keep it away from kids.

room to room 1 to 3 socket wireless power switch